c-dsub-0069 6 contacts dia on active area operating temperature operating current contacts material contact plating insulator material mechanical endurance insulation resistance damp heat maximum voltage contact resistance regulations as described in gs-22-008" the housing will withstand exposure to 260c peak temperature for 3.5 seconds in a wave solder application with a 1.6mm minimum thick circuit board. ordering information d b p v 25 p 5 64 c t x xxx n-threaded fem. screw lock m3 w-riveted fem. screw lock round unc v-fem. screw lock hex. (unc) f-float mounting l-clinch nut (m3) options-1 p-dp series m-dm series e,a,b,c,d blank-standard characterisation packaging as per gs-14-920 series shell size h-shielding termination fingers blank-zinc for dp/cadmium for dm x-on male connectors only blank-standard options-2 shell plating dimples t-std. tin over cu or zinc cr 3 n- obligatory for dm lf lead free special codes shells "this lf product meets european union directives and other country the housing will withstand exposure to 260-265c if we use protective adhesive (type kapton or teflon) 500 matings min.for > 0.75 gold plating 200 matings min.for < 0.40 gold plating 7.5 a per contact >5000 m 1000 v.r.m.s 56 days for > 0.75 gold plating 21 days for < 0.40 gold plating w : : : : : : : : <7.3 m m w m or protective metallic device to ul class 94 v0 -55c +125c copper alloy gold over nickel self extinguishing thermoplastic- tin/cadmium/zinc plated steel : : : : ?1 mm. : : technical specifications no.of contacts 5-angled spill 2.54mm between rows 8-angled spill 2.84mm between rows s - socket p - pin contacts 09,15,25,37,50 termination type s-spacer rivetted to shell o-clinch nut (unc) m 64 - au flash 65 - 0.75 au 67 - 0.4 au 32 - 1.27 au m contact plating blank- 0.2 au m m g-harpoon m-metal bracket c-without bracket (applicable for dm series only) pdm: rev:h released . status: printed: apr 03, 2008
|